EN 1092 Flanges

  • Size: 1/2″ thru 24″ or custom size.
  • Material: Nickel Alloy，Hastelloy Alloy,Monel Alloy,Inconel Allo, Anti-Corrosion Resistant Alloy, Super-Alloy, Duplex Steel, Stainless steel, Titanium Alloy, Copper Alloy, Carbon Steel, Aluminium Steel, ect.
  • Standard: A WWA C207, ASME B16.5, DIN, BS, JIS, EN1092-1, ASME B16.47 and GOST/ГОСТ Standard, etc..
  • Approved by CE, RoHs, SGS, BV
  • Large stock with different sizes
Request A Quick Quote

EN 1092 Flanges Solutions

EN 1092-1 and EN 1092-2 are European standards that specify the technical delivery conditions for steel flanges. The standard includes dimensions, materials, tolerances, marking and testing requirements for steel flanges. The standard applies to flanges with nominal sizes DN 10 to DN 5000 (NPS 1/2 to NPS 80) and pressure classes PN 2.5 to PN 400. This standard includes several different types of flanges, including butt-weld flanges, sliding flanges and threaded flanges. In order to comply with the requirements of EN 1092-1 and EN 1092-2, steel flanges must meet the specified requirements and be correctly marked with the required information.

Table of Contents

What are EN 1092 Flanges?

EN 1092 flanges are flanges manufactured in accordance with European Standard EN 1092. This standard specifies the design and dimensions of flanges used in piping systems, as well as the materials and testing requirements for these flanges. EN 1092 flanges are commonly used in Europe and other parts of the world and are available in a wide range of sizes, pressure ratings and materials. These flanges are used to connect piping and other equipment in a variety of applications, including power plants, oil and gas processing, and chemical processing.

20221213224917 71684 - EN 1092 Flanges

Standard Specication For EN 1092 Flanges

Standard EN 1092-1 Flange, EN 1092-2 Flange
Flanges Dimensions EN 1092,ANSI B16.5, DIN Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
EN 1092 b1 Pipe Flanges Size 1/2″ (15 NB) to 48″ (1200NB)
EN 1092 Flanges Type Plate Flange, Welding neck flange, steel butt-welded flanges, slip on flange, blind flange, welded neck flange, threaded flange, lapped joint flange (loose flange), socket welded flange, Orifice Flanges, long weld neck flange and special flange.
Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Pressure Grade PN 2.5,PN 6,PN 10,PN 16,PN 25,PN 40,PN 63,PN 100,PN 160,PN 250,PN 320,PN 400
Most common types of Stainless Steel EN 1092 pn16 Flanges Forged / Screwed / Threaded / Plate
Production technique Forged, Heat treated and machined
Connect Type/ Flange Face Type Raised Face (RF), Large Male-Female (LMF), Ring Type Joint (RTJ), Flat Face (FF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove

Advantages and disadvantage of EN 1092 Flanges

EN 1092 is a European standard for flanges, which specifies the technical requirements for circular flanges and flanged parts. Some potential advantages of using EN 1092 flanges include that they are:

  • Designed to be interchangeable, which means that flanges from different manufacturers can be used together, provided they conform to the standard.
  • Easy to identify, thanks to the standardized markings on the flange face, which indicate the type, pressure class, and material of the flange.
  • Suitable for a wide range of applications, including petrochemical, oil and gas, and power generation.

As with any type of flange, there are also some potential disadvantages to consider when using EN 1092 flanges, such as:

  • The cost, which can be higher than other types of flanges, due to the need to meet the technical requirements of the standard.
  • Limited availability, as not all flange manufacturers produce flanges to the EN 1092 standard.
  • The need for specialized tools and equipment, such as flange spreaders and flange aligners, to install and maintain EN 1092 flanges.

The advantages and disadvantages of using EN 1092 flanges will depend on your specific application and requirements. It is always a good idea to consult with a flange expert or engineer to determine the best type of flange for your needs.

What are the different types of EN 1092 flanges?

EN 1092-1 flanges are available in a number of different types, including:

EN 1092-1 Type 01: Plate (slip-on) flanges for welding Type 01 flanges are plate (slip-on) flanges that are designed for welding. These flanges have a circular hub and a flat rim, and they are attached to the pipe by welding the hub to the pipe.
EN 1092-1 Type 02: Loose plate flanges with weld-on plate collar Type 02 flanges are loose plate flanges that have a weld-on plate collar. These flanges are similar to type 01 flanges, but they are not welded directly to the pipe. Instead, they are attached to the pipe using a separate collar that is welded to the pipe.
EN 1092-1 Type 04: Loose plate flanges with weld-neck collar Type 04 flanges are similar to type 02 flanges, but they have a weld-neck collar instead of a plate collar. These flanges are attached to the pipe using a weld-neck collar that is welded to the pipe.
EN 1092-1 Type 05: Blank (blind) flanges Type 05 flanges are blank (blind) flanges. These flanges are solid and do not have a central hole. They are used to close off the end of a pipe or other fitting.
EN 1092-1 Type 11: Weld-neck flanges Type 11 flanges are weld-neck flanges. These flanges have a circular hub with a tapered, neck-like projection that is welded to the pipe.
EN 1092-1 Type 13: Hubbed threaded flanges Type 13 flanges are hubbed threaded flanges. These flanges have a threaded hub that is used to attach the flange to the pipe using bolts.
EN 1092-1 Type 21: Integral flanges Type 21 flanges are integral flanges. These flanges are formed by rolling or forging, and they are integral with the pipe to which they are attached.
EN 1092-1 Type 32: Weld-on plate collars Type 32 flanges are weld-on plate collars. These collars are used to attach type 02 flanges to pipes, by welding the collar to the pipe.
EN 1092-1 Type 33: Lapped pipe ends Type 33 flanges have lap-joint ends, which means that the ends of the pipes are overlapped and then attached to the flange with a lap-joint stub end. This type of flange is often used in low-pressure systems where the flange does not need to be sealed.
EN 1092-1 Type 34: Weld-neck collars Type 34 flanges have weld-neck collars, which means that the flange has a neck that extends from the body of the flange and is used to attach the flange to a pipe by welding. This type of flange is often used in high-pressure systems where a tight seal is required.

Each type of flange has a different design and is used in different applications. For example, slip-on flanges are often used for low-pressure piping, while weld neck flanges are used in high-pressure systems. It is important to choose the right type of flange for your application to ensure a secure and reliable connection.

Material of EN 1092 Flanges

EN 1092 flanges are typically made of cast or forged carbon steel, stainless steel or other alloy materials. The specific material used depends on the application and design specification of the flange. It is important to select the right material for the flange to ensure that it is strong and durable enough to withstand the pressure and temperature conditions in which it will be used.  

EN 1092-1/EN 1092-2 Alloy 20 Flange ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91
EN 1092-1/EN 1092-2 Carbon Steel Flange ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80)
EN 1092-1/EN 1092-2 Inconel Alloy Flange ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750 BS 10
EN 1092-1/EN 1092-2 Monel Alloy Flanges ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)
EN 1092-1/EN 1092-2 Titanium Flanges ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7 ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5
EN 1092-1/EN 1092-2 Hastelloy Alloy Flange ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X
EN 1092-1/EN 1092-2 Alloy Steel Flange ASTM B462 / ASME SB462, Carpenter 20 Alloy, Alloy 20Cb-3
EN 1092-1/EN 1092-2 Aluminium Flanges 5052 /6061/ 6063 / 2017 / 7075 / etc.
EN 1092-1/EN 1092-2 Nickel Alloy Flange ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC
EN 1092-1/EN 1092-2 254 Smo flange SMO 254/6Mo, ASTM A182 / ASME SA182, UNS S31254, DIN 1.4547
Other EN 1092-1/EN 1092-2 Flanges material Aluminium bronze, Tin bronze, Lead bronze
EN 1092-1/EN 1092-2 Super Duplex Steel Flanges S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
EN 1092-1/EN 1092-2 Nimonic Flange Nimonic 75, Nimonic 80A, Nimonic 90
EN 1092-1/EN 1092-2 Copper Flanges T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
EN 1092-1/EN 1092-2 Copper Nickel Flange ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640
EN 1092-1/EN 1092-2 Incoloy Flange ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925
EN 1092-1/EN 1092-2 Duplex Steel Flanges S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
EN 1092-1/EN 1092-2 Brass Flange 3602 / 2604 / H59 / H62 / etc.

Size of EN 1092 Flanges

EN 1092 flanges are available in a variety of sizes, depending on the specific type and style of flange. some common sizes of EN 1092 flanges include DN15 (1/2 inch), DN20 (3/4 inch), DN25 (1 inch), DN32 (1 1/4 inch), DN40 (1 1/2 inch), DN50 (2 inch), DN65 (2 1/2 inch) and DN80 (3 in.), DN100 (4 in.), DN150 (6 in.) and DN200 (8 in.). These are just some examples of the sizes available, the exact size of a particular EN 1092 flange will depend on its intended application and the requirements of the system used.

Dimensions of EN 1092 Flanges

The dimensions of EN 1092 flanges vary depending on the specific type and size of the flange. For example, a flange of type 01 PN6 with a diameter of DN 15 (nominal size 15 mm) has a flange diameter of 40 mm and a bolt circle diameter of 28 mm.

DIN EN 1092-1 PN-2.5 Flange Dimensions

20221214012200 39902 - EN 1092 Flanges

D: Outside Diameter K: Diameter of Bolt Circle L: Diameter of Bolt Hole

A: Outside Diameter of Neck E: Chamfer F: Collar thickness

G max: Diameter of Shoulders R: Corner Radius N: Neck Diameter S: Neck Thickness (Preferred value)

 

DN Mating dimensions A Bore Flange F G Length
D K L Bolting Diameter thickness max
No Size B1 B2 C1* C2 C4 H2 H3 H4 H5
C3
Flange type
01, 02, 05, 11, 21 11, 21 1 2 1 11 5 32 35 36 37 5 11 11 35 36 37
35-37 32 2 21
10 75 50 11 4 M10 17.2 18 21 12 12 12 10 5 2 2.5 – 28 6 28 35 7
15 80 55 11 4 M10 21.3 22 25 12 12 12 10 5 2 2.5 – 30 6 30 38 7
20 90 65 11 4 M10 26.9 27.5 31 14 14 14 10 6 2.5 3 – 32 6 32 40 8
25 100 75 11 4 M10 33.7 34.5 38 14 14 14 10 7 2.5 3 – 35 6 35 40 10
32 120 90 14 4 M12 42.4 43.5 46 16 14 14 10 8 3 3 – 35 6 35 42 12
40 130 100 14 4 M12 48.3 49.5 53 16 14 14 10 8 3 3 – 38 7 38 45 15
50 140 110 14 4 M12 60.3 61.5 65 16 14 14 12 8 3 3 – 38 8 38 45 20
65 160 130 14 4 M12 76.1 77.5 81 16 14 14 12 8 3 3 55 38 9 38 45 20
80 190 150 18 4 M16 88.9 90.5 94 18 16 16 12 10 3 4 70 42 10 42 50 25
100 210 170 18 4 M16 114.3 116 120 18 16 16 14 10 4 4 90 45 10 45 52 25
125 240 200 18 8 M16 139.7 141.5 145 20 18 18 14 10 4 4 115 48 10 48 55 25
150 265 225 18 8 M16 168.3 170.5 174 20 18 18 14 10 5 4 140 48 12 48 55 25
200 320 280 18 8 M16 219.1 221.5 226 22 20 20 16 11 5 5 190 55 15 55 62 30
250 375 335 18 12 M16 273 276.5 281 24 22 22 18 12 8 – 235 60 15 60 68 –
300 440 395 22 12 M20 323.9 327.5 333 24 22 22 18 12 8 – 285 62 15 62 68 –
350 490 445 22 12 M20 355.6 359.5 365 26 22 22 18 13 8 – 330 62 15 62 68 –
400 540 495 22 16 M20 406.4 411 416 28 22 22 20 14 8 – 380 65 15 65 72 –
450 595 550 22 16 M20 457 462 467 30 22 24 20 15 8 – 425 65 15 65 72 –
500 645 600 22 20 M20 508 513.5 519 30 24 24 22 16 8 – 475 68 15 68 75 –
600 755 705 26 20 M24 610 616.5 622 32 30 30 22 16 – – 575 70 16 70 – –
700 860 810 26 24 M24 711 – 721 40 30 40 – 16 – – 670 76 16 70 – –
800 975 920 30 24 M27 813 – 824 44 30 44 – 16 – – 770 76 16 70 – –
900 1075 1020 30 24 M27 914 – 926 48 30 48 – 16 – – 860 74 16 70 – –
1000 1175 1120 30 28 M27 1016 – 1028 52 30 52 – 18 – – 960 74 16 70 – –
1200 1375 1320 30 32 M27 1219 – 1234 60 32 50 – 20 – – 1160 94 20 90 – –
1400 1575 1520 30 36 M27 1422 – – – 38 – – – – – 1346 96 20 – – –
1600 1790 1730 30 40 M27 1626 – – – 46 – – – – – 1546 102 20 – – –
1800 1990 1930 30 44 M27 1829 – – – 46 – – – – – 1746 110 20 – – –
2000 2190 2130 30 48 M27 2032 – – – 50 – – – – – 1950 122 22 – – –
2200 2405 2340 33 52 M27 2035 – – – 56 – – – – – – 129 25 – – –
2400 2605 2540 33 56 M30 2438 – – – 62 – – – – – – 143 25 – – –
2600 2805 2740 33 60 M30 2620 – – – 64 – – – – – – 148 25 – – –
2800 3030 2960 36 64 M30 2820 – – – 74 – – – – – – 161 25 – – –
3000 3230 3160 36 68 M33 3020 – – – 80 – – – – – – 170 25 – – –
3200 3430 3360 36 72 M33 3220 – – – 84 – – – – – – 180 25 – – –
3400 3630 3560 36 76 M33 3420 – – – 90 – – – – – – 194 28 – – –
3600 3840 3770 36 80 M33 3620 – – – 96 – – – – – – 201 28 – – –
3800 4045 3970 39 80 M36 3820 – – – 102 – – – – – – 212 28 – – –
4000 4245 4170 39 84 M36 4020 – – – 106 – – – – – – 226 28 – – –

 

DIN EN 1092-1 PN-6 Flange Dimensions

20221214012200 39902 - EN 1092 Flanges

D: Outside Diameter K: Diameter of Bolt Circle L: Diameter of Bolt Hole

A: Outside Diameter of Neck E: Chamfer F: Collar thickness

G max: Diameter of Shoulders R: Corner Radius N: Neck Diameter S: Neck Thickness (Preferred value)

DN Mating dimensions A Bore Flange E F G max Length Neck R S
D K L Bolting Diameter thickness diameters
No Size B1 B2 C1* C2 C4 H1 H2 H3 N1 N2 N3
C3
Flange type
01, 02, 05, 11, 12, 13, 21 11 1 2 1 11 5 2 32 5 12 11 11 11 12 21 11 11
21** 12 2 12 4 34 34 34 34 12
32 4 13 13
21 21
10 75 50 11 4 M10 17.2 18 21 12 12 12 3 10 – 20 28 6 26 25 20 4 1.8
15 80 55 11 4 M10 21.3 22 25 12 12 12 3 10 – 20 30 6 30 30 26 4 2
20 90 65 11 4 M10 26.9 27.5 31 14 14 14 4 10 – 24 32 6 38 40 34 4 2.3
25 100 75 11 4 M10 33.7 34.5 38 14 14 14 4 10 – 24 35 6 42 50 44 4 2.6
32 120 90 14 4 M12 42.4 43.5 46 16 14 14 5 10 – 26 35 6 55 60 54 6 2.6
40 130 100 14 4 M12 48.3 49.5 53 16 14 14 5 10 – 26 38 7 62 70 64 6 2.6
50 140 110 14 4 M12 60.3 61.5 65 16 14 14 5 12 – 28 38 8 74 80 74 6 2.9
65 160 130 14 4 M12 76.1 77.5 81 16 14 14 6 12 55 32 38 9 88 100 94 6 2.9
80 190 150 18 4 M16 88.9 90.5 94 18 16 16 6 12 70 34 42 10 102 110 110 8 3.2
100 210 170 18 4 M16 114.3 116 120 18 16 16 6 14 90 40 45 10 130 130 130 8 3.6
125 240 200 18 8 M16 139.7 141.5 145 20 18 18 6 14 115 44 48 10 155 160 160 8 4
150 265 225 18 8 M16 168.3 170.5 174 20 18 18 6 14 140 44 48 12 184 185 182 10 4.5
200 320 280 18 8 M16 219.1 221.5 226 22 20 20 6 16 190 44 55 15 236 240 238 10 5.9
250 375 335 18 12 M16 273 276.5 281 24 22 22 8 18 235 44 60 15 290 295 284 12 6.3
300 440 395 22 12 M20 323.9 327.5 333 24 22 22 8 18 285 44 62 15 342 355 342 12 7.1
350 490 445 22 12 M20 355.6 359.5 365 26 22 22 8 18 330 – 62 15 385 – 392 12 7.1
400 540 495 22 16 M20 406.4 411 416 28 22 22 8 20 380 – 65 15 438 – 442 12 7.1
450 595 550 22 16 M20 457 462 467 30 22 24 8 20 425 – 65 15 492 – 494 12 7.1
500 645 600 22 20 M20 508 513.5 519 30 24 24 8 22 475 – 68 15 538 – 544 12 7.1
600 755 705 26 20 M24 610 616.5 622 32 30 30 8 22 575 – 70 16 640 – 642 12 7.1
700 860 810 26 24 M24 711 – – – 24 40 – – 670 – 70 16 740 – 746 12 7.1
800 975 920 30 24 M27 813 – – – 24 44 – – 770 – 70 16 842 – 850 12 7.1
900 1075 1020 30 24 M27 914 – – – 26 48 – – 860 – 70 16 942 – 950 12 7.1
1000 1175 1120 30 28 M27 1016 – – – 26 52 – – 960 – 70 16 1045 – 1050 16 7.1
1200 1405 1340 33 32 M30 1219 – – – 28 60 – – 1160 – 90 20 1248 – 1264 16 8
1400 1630 1560 36 36 M33 1422 – – – 32 68 – – 1346 – 90 20 1452 – 1480 16 8
1600 1830 1760 36 40 M33 1626 – – – 34 76 – – 1546 – 90 20 1655 – 1680 16 9
1800 2045 1970 39 44 M36 1829 – – – 36 84 – – 1746 – 100 20 1855 – 1878 16 10
2000 2265 2180 42 48 M39 2032 – – – 38 92 – – 1950 – 110 25 2058 – 2082 16 11
2200 2475 2390 42 52 M39 2035 – – – 42 – – – – – 115 25 2260 – – 18 12
2400 2685 2600 42 56 M39 2438 – – – 44 – – – – – 125 25 2462 – – 18 13
2600 2905 2710 48 60 M45 2620 – – – 46 – – – – – 130 25 2665 – – 18 14
2800 3115 3020 48 64 M45 2820 – – – 48 – – – – – 135 30 2865 – – 18 15
3000 3315 3220 48 68 M45 3020 – – – 50 – – – – – 140 30 3068 – – 18 16
3200 3525 3430 48 72 M45 3220 – – – 54 – – – – – 150 30 3272 – – 20 18
3400 3735 3640 48 76 M45 3420 – – – 56 – – – – – 160 35 3475 – – 20 18
3600 3970 3860 56 80 M52 3620 – – – 60 – – – – – 165 35 3678 – – 20 18
  • Above DN 600 dimension C1 is to be specified by the purchaser.
  • For flanges type 21 the outside hub diameter approximately corresponds to the outside pipe diameter.

DIN EN 1092-1 PN10 Flange Dimensions

20221214012200 39902 - EN 1092 Flanges

D: Outside Diameter K: Diameter of Bolt Circle L: Diameter of Bolt Hole

A: Outside Diameter of Neck E: Chamfer F: Collar thickness

G max: Diameter of Shoulders R: Corner Radius N: Neck Diameter S: Neck Thickness (Preferred value)

DN Mating dimensions A Bore Diameter Flange Thickness E F G max Length
Neck

 

Diameters

 

R S
D K L Bolting
No Size B1 B2 B3 C1 C2 C3 C4 H1 H2 H3 N1 N2 N3
Flange type
01, 02, 05, 11, 12, 13, 21
11

 

21*

 

34
01

 

12

 

32
 02 04
01

 

02

 

04
11

 

12

 

13
 21 05
02

 

04

 

32

 

34

 

05 12
11

 

34

 

11

 

34

 

11

 

34

 

12 21
11

 

12

 

21
11

 

34

 

10 dimensiones PN 40
15
20
25
32
40
50 dimensiones PN 16
65
80
100
125
150
200 340 295 22 8 M20 219.1 221.5 226 240 24 24 24 24 6 20 190 44 62 16 234 246 246 10 5.9
250 395 350 22 12 M20 273 276.5 218 294 26 26 26 26 8 22 235 46 68 16 292 298 298 12 6.3
300 445 400 22 12 M20 323.9 327.5 333 348 26 26 26 26 8 22 285 46 68 16 342 350 348 12 7.1
350 505 460 22 16 M20 335.6 359.5 365 400 28 26 26 26 8 22 330 53 68 16 385 400 408 12 7.1
400 565 515 26 16 M24 406.4 411 416 450 32 26 26 26 8 24 380 57 72 16 440 456 456 12 7.1
450 615 565 26 20 M24 457 462 467 498 36 28 28 28 8 24 425 63 72 16 488 502 502 12 7.1
500 670 620 26 20 M24 508 513.5 519 550 38 28 28 28 8 26 475 67 75 16 542 559 559 12 7.1
600 780 725 30 20 M27 610 616.5 622 650 42 34 34 34 8 26 575 75 80 18 642 658 658 12 7.1
700 895 840 30 24 M27 711.1 – – – – 30 34 38 – – 670 – 80 18 746 – 772 12 8
800 1015 950 33 24 M30 813 – – – – 32 36 42 – – 770 – 90 18 850 – 876 12 8
900 1115 1050 33 28 M30 914 – – – – 34 38 46 – – 860 – 95 20 950 – 976 12 10
1000 1230 1160 36 28 M33 1016 – – – – 34 38 52 – – 960 – 95 20 1052 – 1080 16 10
1200 1455 1380 39 32 M36 1219 – – – – 38 44 60 – – 1160 – 115 25 1256 – 1292 16 11
1400 1675 1590 42 36 M39 1422 – – – – 42 48 – – – 1346 – 120 25 1460 – 1496 16 12
1600 1915 1820 48 40 M45 1626 – – – – 46 52 – – – 1546 – 130 25 4666 – 1712 16 14
1800 2115 2020 48 44 M45 1829 – – – – 50 56 – – – 1746 – 140 30 4868 – 1910 16 15
2000 2325 2230 48 48 M45 2032 – – – – 54 60 – – – 1950 – 150 30 2072 – 2120 16 16
2200 2550 2440 56 52 M52 2235 – – – – 58 – – – – – – 160 35 2275 – – 18 18
2400 2760 2650 56 56 M52 2438 – – – – 62 – – – – – – 170 35 2478 – – 18 20
2600 2960 2850 56 60 M52 2620 – – – – 66 – – – – – – 180 40 2680 – – 18 20
2800 3180 3070 56 64 M52 2820 – – – – 70 – – – – – – 190 40 2882 – – 18 22
3000 3405 3290 62 68 M56 3020 – – – – 75 – – – – – – 200 45 3085 – – 18 24
  • For flanges type 21 the outside hub diameter approximately corresponds to the outside pipe diameter.

Note : The p/t rating from EN 1092-1 apply only for flange type 05, 11, 12, 13 and 21 having nominal sizes up to and including DN 600. The p/t rating of all other flanges shall be agreed between the manufacturer and the purchaser.

DIN EN 1092-1 PN16 Flange Dimensions

en 1092 1 pn160 flange dimensions 2 - EN 1092 Flanges

Typ 01: Plate (slip-on) flanges for welding Typ 13: Hubbed threaded flanges
Typ 02: Loose plate flanges with weld-on plate collar Typ 21: Integral flanges
Typ 04: Loose plate flanges with weld-neck collar Typ 32: Weld-on plate collars
Typ 05: Blank (blind) flanges Typ 33: Lapped pipe ends
Typ 11: Weld-neck flanges Typ 34: Weld-neck collars
Typ 12: Hubbed slip-on flanges for welding  
D: Outside Diameter K: Diameter of Bolt Circle L: Diameter of Bolt Hole A: Outside Diameter of Neck E: Chamfer F: Collar thickness G max: Diameter of Shoulders R: Corner Radius N: Neck Diameter S: Neck Thickness (Preferred value)
DN Mating dimensions A Bore Diameter Flange Thickness E F G max Length
Neck

 

Diameters

 

R S
D K L Bolting
No Size B1 B2 B3 C1 C2 C3 C4 H1 H2 H3 N1 N2 N3
Flange type
01, 02, 05, 11, 12, 21
11

 

21*

 

34
01

 

12

 

32
 02 04
01

 

02

 

04
11

 

12

 

13
 21 05
02

 

04

 

32

 

34

 

05
12

 

13

 

11

 

34

 

11

 

34

 

11

 

34

 

12

 

13

 

21
11

 

12

 

13

 

21

 

11

 

34

 

10 dimensiones PN 40
15
20
25
32
40
50 165 125 18 4 M16 60.3 61.5 65 77 19 18 18 18 5 16 – 28 45 8 74 84 84 5 2.9
65 185 145 18 ** M16 76.1 77.5 81 96 20 18 18 18 6 16 55 32 45 10 92 104 104 6 2.9
80 200 160 18 8 M16 88.9 90.5 94 108 20 20 20 20 6 16 70 34 50 10 105 118 120 6 3.2
100 220 180 18 8 M16 114.3 116 120 134 22 20 20 20 6 18 90 40 52 12 131 140 140 8 3.6
125 250 210 18 8 M16 139.7 141.5 145 162 22 22 22 22 6 18 115 44 55 12 156 168 170 8 4
150 285 240 18 8 M20 168.3 170.5 174 188 24 22 22 22 6 20 140 44 55 12 184 195 190 10 4.5
200 340 295 22 12 M20 219.1 221.5 226 240 26 24 24 24 6 20 190 44 62 16 235 246 246 10 5.9
250 405 355 26 12 M24 273 276.5 281 294 29 26 26 26 8 22 235 46 70 16 292 298 296 12 6.3
300 460 410 26 12 M24 323.9 327.5 333 348 32 28 28 28 8 24 285 46 78 16 344 350 350 12 7.1
350 520 470 26 16 M24 355.6 359.5 365 400 35 30 30 30 8 26 330 57 82 16 390 400 410 12 8
400 580 525 30 16 M27 406.4 411 416 454 38 32 32 32 8 28 380 63 85 16 445 456 458 12 8
450 640 585 30 20 M27 457 462 467 500 42 40 40 40 8 30 425 68 87 16 490 502 516 12 8
500 715 650 33 20 M30 508 513.5 519 556 46 44 44 44 8 32 475 73 90 16 548 559 576 12 8
600 840 770 36 20 M33 610 616.5 622 660 52 54 54 54 8 32 575 83 95 18 652 658 690 12 8.8
700 910 840 36 24 M33 711.1 – – – – 36 42 48 – – 670 83 100 18 755 760 760 12 8.8
800 1025 950 39 24 M36 813 – – – – 38 42 52 – – 770 90 105 20 855 864 862 12 10
900 1125 1050 39 28 M36 914 – – – – 40 44 58 – – 860 94 110 20 955 968 962 12 10
1000 1255 1170 42 28 M39 1016 – – – – 42 46 64 – – 960 100 120 22 1058 1072 1076 16 10
1200 1485 1390 48 32 M45 1219 – – – – 48 52 76 – – 1160 – 130 30 1262 – 1282 16 12.5
1400 1685 1590 48 36 M45 1422 – – – – 52 58 – – – 1346 – 145 30 1465 – 1482 16 14.2
1600 1930 1820 56 40 M52 1626 – – – – 58 64 – – – 1546 – 160 35 1668 – 1696 16 16
1800 2130 2020 56 44 M52 1829 – – – – 62 68 – – – 1746 – 170 35 1870 – 1896 16 17.5
2000 2345 2230 62 48 M56 2032 – – – – 66 70 – – – 1950 – 180 40 2072 – 2100 16 20
  • For flanges type 21 the outside hub diameter approximately corresponds to the outside pipe diameter.

Note : The p/t rating from EN 1092-1 apply only for flange type 05, 11, 12, 13 and 21 having nominal sizes up to and including DN 600. The p/t rating of all other flanges shall be agreed between the manufacturer and the purchaser.

EN 1092-1 PN25 Flange Dimensions

en 1092 1 pn160 flange dimensions 2 - EN 1092 Flanges

Typ 01: Plate (slip-on) flanges for welding Typ 13: Hubbed threaded flanges
Typ 02: Loose plate flanges with weld-on plate collar Typ 21: Integral flanges
Typ 04: Loose plate flanges with weld-neck collar Typ 32: Weld-on plate collars
Typ 05: Blank (blind) flanges Typ 33: Lapped pipe ends
Typ 11: Weld-neck flanges Typ 34: Weld-neck collars
Typ 12: Hubbed slip-on flanges for welding  
D: Outside Diameter K: Diameter of Bolt Circle L: Diameter of Bolt Hole A: Outside Diameter of Neck E: Chamfer F: Collar thickness G max: Diameter of Shoulders R: Corner Radius N: Neck Diameter S: Neck Thickness (Preferred value)
DN Mating dimensions A Bore Diameter Flange Thickness E F G max Length
Neck

 

Diameters

 

R S
D K L Bolting
No Size B1 B2 B3 C1 C2 C3 C4 H1 H2 H3 N1 N2 N3
Flange type
01, 02, 05, 11, 12, 21
11

 

21*

 

34
01

 

12

 

32
 02 04
01

 

02

 

04
11

 

12

 

13
 21 05
02

 

04

 

32

 

34

 

05
12

 

13

 

11

 

34

 

11

 

34

 

11

 

34

 

12

 

13

 

21
11

 

12

 

13

 

21

 

11

 

34

 

10 dimensiones PN 40
15
20
25
32
40
50
65
80
100
125
150
200 360 310 26 12 M24 219.1 221.5 226 250 32 30 30 30 6 26 190 52 80 16 244 256 252 10 6.3
250 425 370 30 12 M27 273.5 276.5 281 302 35 32 32 32 8 26 235 60 88 18 298 310 304 12 7.1
300 485 430 30 16 M27 323.9 327.5 333 356 38 34 34 34 8 28 285 67 92 18 352 364 364 12 8
350 555 490 33 16 M30 355.6 359.5 365 408 42 38 38 38 8 32 332 72 100 20 398 418 418 12 8
400 620 550 36 16 M33 406.4 411 416 462 46 40 40 40 8 34 380 78 110 20 452 472 472 12 8.8
450 670 600 36 20 M33 457 462 467 510 50 46 46 46 8 36 425 84 110 20 500 520 520 12 8.8
500 730 660 36 20 M33 508 513.5 519 568 56 48 48 48 8 38 475 90 125 20 558 580 580 12 10
600 845 770 39 20 M36 610 616.5 622 670 68 58 58 58 8 40 575 100 125 20 660 684 684 12 11
700 960 875 42 24 M39 711 – – – – 46 50 – – – – – 125 20 760 – 780 12 12.5
800 1085 990 48 24 M45 813 – – – – 50 54 – – – – – 135 22 864 – 882 12 14.2
900 1158 1090 48 28 M45 914 – – – – 54 58 – – – – – 145 24 968 – 982 12 16
1000 1320 1210 56 28 M52 1016 – – – – 58 62 – – – – – 155 24 1070 – 1086 16 17.5
1200 1530 1420 56 32 M52 1219 – – – – – 70 – – – – – – – – – 1296 18 –
1400 1755 1640 62 36 M56 1422 – – – – – 76 – – – – – – – – – 1508 18 –
1600 1975 1860 62 40 M56 1626 – – – – – 84 – – – – – – – – – 1726 20 –
1800 2195 2070 70 44 M64 1829 – – – – – 90 – – – – – – – – – 1920 20 –
2000 2425 2300 70 48 M64 2032 – – – – – 96 – – – – – – – – – 2150 20 –
  • For flanges type 21 the outside hub diameter approximately corresponds to the outside pipe diameter.

Note : The p/t rating from EN 1092-1 apply only for flange type 05, 11, 12, 13 and 21 having nominal sizes up to and including DN 600. The p/t rating of all other flanges shall be agreed between the manufacturer and the purchaser.

EN 1092-1 PN40 Flange Dimensions

en 1092 1 pn160 flange dimensions 2 - EN 1092 Flanges

Typ 01: Plate (slip-on) flanges for welding Typ 13: Hubbed threaded flanges
Typ 02: Loose plate flanges with weld-on plate collar Typ 21: Integral flanges
Typ 04: Loose plate flanges with weld-neck collar Typ 32: Weld-on plate collars
Typ 05: Blank (blind) flanges Typ 33: Lapped pipe ends
Typ 11: Weld-neck flanges Typ 34: Weld-neck collars
Typ 12: Hubbed slip-on flanges for welding  
D: Outside Diameter K: Diameter of Bolt Circle L: Diameter of Bolt Hole A: Outside Diameter of Neck E: Chamfer F: Collar thickness G max: Diameter of Shoulders R: Corner Radius N: Neck Diameter S: Neck Thickness (Preferred value)
DN Mating dimensions A Bore Diameter Flange Thickness E F G max Length
Neck

 

Diameters

 

R S
D K L Bolting
No Size B1 B2 B3 C1 C2 C3 C4 H1 H2 H3 N1 N2 N3
Flange type
01, 02, 05, 11, 12, 21
11

 

21*

 

34
01

 

12

 

32
 02 04
01

 

02

 

04
11

 

12

 

13
 21 05
02

 

04

 

32

 

34

 

05
12

 

13

 

11

 

34

 

11

 

34

 

11

 

34

 

12

 

13

 

21
11

 

12

 

13

 

21

 

11

 

34

 

10 90 60 14 4 M12 17.2 18 21 31 14 16 16 3 12 – 22 35 6 28 30 28 4 1.8
15 95 65 14 4 M12 21.3 22 25 35 14 16 16 3 12 – 22 38 6 32 35 32 4 2
20 105 75 14 4 M12 26.9 27.5 31 42 16 18 18 4 14 – 26 40 6 40 45 40 4 2.3
25 115 85 14 4 M12 33.7 34.5 38 49 16 18 18 4 14 – 28 40 6 46 52 52 4 2.6
32 140 100 18 4 M16 42.4 43.5 47 59 18 18 18 5 14 – 30 42 6 56 60 60 6 2.6
40 150 110 18 4 M16 48.3 49.5 53 67 18 18 18 5 14 – 32 45 7 64 70 70 6 2.6
50 165 125 18 4 M16 60.3 61.5 65 77 20 20 20 5 16 – 34 48 8 75 84 84 6 2.9
65 185 145 18 8 M16 76.1 77.5 81 96 22 22 22 6 16 55 38 52 10 90 104 104 6 2.9
80 200 160 18 8 M16 88.9 90.5 94 114 24 24 24 6 18 70 40 58 12 105 118 120 8 3.2
100 235 190 22 8 M20 114.3 116 120 138 26 24 24 6 20 90 44 65 12 134 145 142 8 3.6
125 270 220 26 8 M24 139.7 141.5 145 166 28 26 26 6 22 115 48 68 12 162 170 162 8 4
150 300 250 26 8 M24 168.3 170.5 174 194 30 28 28 6 24 140 52 75 12 192 200 192 10 4.5
200 375 320 30 12 M27 219.1 221.5 226 250 36 34 36 6 28 190 52 88 16 244 260 254 10 6.3
250 450 385 33 12 M30 273 276.5 281 312 42 38 38 8 30 235 60 105 18 306 312 312 12 7.1
300 515 450 33 16 M30 323.9 327.5 333 368 48 42 42 8 34 285 67 115 18 362 380 378 12 8
350 580 510 36 16 M33 355.6 359.5 365 418 54 46 46 8 36 330 72 125 20 408 424 432 12 8.8
400 660 585 39 16 M36 406.4 411 416 472 60 50 50 8 42 380 78 135 20 462 478 498 12 11
450 685 610 39 20 M36 457 462 467 510 66 57 57 8 46 425 84 135 20 500 522 522 12 12.5
500 755 670 42 20 M39 508 513.5 519 572 72 57 57 8 50 475 90 140 20 562 576 576 12 14.2
600 890 795 48 20 M45 610 616.5 622 676 84 72 72 8 54 575 100 150 20 666 686 686 12 16
  • For flanges type 21 the outside hub diameter approximately corresponds to the outside pipe diameter.

Note : The p/t rating from EN 1092-1 apply only for flange type 05, 11, 12, 13 and 21 having nominal sizes up to and including DN 600. The p/t rating of all other flanges shall be agreed between the manufacturer and the purchaser.

EN 1092-1 PN63 Flange Dimensions

en 1092 1 pn160 flange dimensions 2 - EN 1092 Flanges

Typ 01: Plate (slip-on) flanges for welding Typ 13: Hubbed threaded flanges
Typ 02: Loose plate flanges with weld-on plate collar Typ 21: Integral flanges
Typ 04: Loose plate flanges with weld-neck collar Typ 32: Weld-on plate collars
Typ 05: Blank (blind) flanges Typ 33: Lapped pipe ends
Typ 11: Weld-neck flanges Typ 34: Weld-neck collars
Typ 12: Hubbed slip-on flanges for welding  
D: Outside Diameter K: Diameter of Bolt Circle L: Diameter of Bolt Hole A: Outside Diameter of Neck E: Chamfer F: Collar thickness G max: Diameter of Shoulders R: Corner Radius N: Neck Diameter S: Neck Thickness (Preferred value)
DN Mating dimensions A Bore Diameter Flange Thickness E F G max Length
Neck

 

Diameters

 

R S
D K L Bolting
No Size B1 B2 B3 C1 C2 C3 C4 H1 H2 H3 N1 N2 N3
Flange type
01, 05, 11, 12, 13, 21
11

 

21*

 

01

 

12

 

– – 01
11

 

12

 

13
 21 05 – – 05
12

 

13

 

11 11 11
12

 

13

 

21
11

 

12

 

13

 

21

 

11
10 dimensiones PN 100
15
20
25
32
40
50 180 135 22 4 M20 60.3 61.5 – – 26 26 26 26 – – – 36 62 10 82 90 90 6 2.9
65 205 160 22 8 M20 76.1 77.5 – – 26 26 26 26 – – 45 40 68 12 98 112 105 6 3.2
80 215 170 22 8 M20 88.9 90.5 – – 30 28 28 28 – – 60 44 72 12 112 125 122 8 3.6
100 250 200 26 8 M24 114.3 116 – – 32 30 30 30 – – 80 52 78 12 138 152 146 8 4
125 295 240 30 8 M27 139.7 141.5 – – 34 34 34 34 – – 105 56 88 12 168 185 177 8 4.5
150 345 280 33 8 M30 168.3 170.5 – – 36 36 36 36 – – 130 60 95 12 202 215 204 10 5.6
200 415 345 36 12 M33 219.1 221.5 – – 46 42 42 42 – – 180 – 110 16 256 – 264 10 7.1
250 470 400 36 12 M33 273 276.5 – – 54 46 46 46 – – 220 – 125 18 316 – 320 12 8.8
300 530 460 36 16 M33 323.9 327.5 – – 62 52 52 52 – – 270 – 140 18 372 – 378 12 11
350 600 525 39 16 M36 355.6 359.5 – – 72 56 56 56 – – 310 – 150 20 420 – 434 12 12.5
400 670 585 42 16 M39 406.4 411 – – 78 60 60 60 – – 360 – 160 20 475 – 490 12 14.2
500 800 705 48 20 M45 – – – – – – 68 – – – – – – – – – 602 12 –
600 930 820 56 20 M52 – – – – – – 76 – – – – – – – – – 714 15 –
700 1045 935 56 24 M52 – – – – – – 84 – – – – – – – – – 826 15 –
800 1165 1050 62 24 M56 – – – – – – 92 – – – – – – – – – 938 18 –
900 1285 1170 62 28 M56 – – – – – – 98 – – – – – – – – – 1048 18 –
1000 1415 1290 70 28 M64 – – – – – – 108 – – – – – – – – – 1162 18 –
1200 1665 1530 78 32 M72 – – – – – – 126 – – – – – – – – – 1390 18 –
  • For flanges type 21 the outside hub diameter approximately corresponds to the outside pipe diameter.

Note : The p/t rating from EN 1092-1 apply only for flange type 05, 11, 12, 13 and 21 having nominal sizes up to and including DN 600. The p/t rating of all other flanges shall be agreed between the manufacturer and the purchaser.

EN 1092-1 PN100 Flange Dimensions

en 1092 1 pn160 flange dimensions 2 - EN 1092 Flanges

Typ 01: Plate (slip-on) flanges for welding Typ 13: Hubbed threaded flanges
Typ 02: Loose plate flanges with weld-on plate collar Typ 21: Integral flanges
Typ 04: Loose plate flanges with weld-neck collar Typ 32: Weld-on plate collars
Typ 05: Blank (blind) flanges Typ 33: Lapped pipe ends
Typ 11: Weld-neck flanges Typ 34: Weld-neck collars
Typ 12: Hubbed slip-on flanges for welding  
D: Outside Diameter K: Diameter of Bolt Circle L: Diameter of Bolt Hole A: Outside Diameter of Neck E: Chamfer F: Collar thickness G max: Diameter of Shoulders R: Corner Radius N: Neck Diameter S: Neck Thickness (Preferred value)
DN Mating dimensions A Bore Diameter Flange Thickness E F G max Length
Neck

 

Diameters

 

R S
D K L Bolting
No Size B1 B2 B3 C1 C2 C3 C4 H1 H2 H3 N1 N2 N3
Flange type
01, 05, 11, 12, 21
11

 

21*

 

01

 

12

 

– – 01
11

 

12

 

13
 21 05 – – 05
12

 

13

 

11 11 11
12

 

13

 

21
11

 

12

 

13

 

21

 

11
10 100 70 14 4 M12 17.2 18 – – 20 20 20 20 – – – 28 45 6 32 40 40 4 1.8
15 105 75 14 4 M12 21.3 22 – – 20 20 20 20 – – – 28 45 6 34 43 45 4 2
20 130 90 18 4 M16 26.9 27.5 – – 22 22 22 22 – – – 30 48 8 42 52 50 4 2.6
25 140 100 18 4 M16 33.7 34.5 – – 24 24 24 24 – – – 32 58 8 52 60 61 4 2.6
32 155 110 22 4 M20 42.4 43.5 – – 24 24 26 24 – – – 32 60 8 62 68 68 6 2.9
40 170 125 22 4 M20 48.3 49.5 – – 26 26 28 26 – – – 34 62 10 70 80 82 6 2.9
50 195 145 26 4 M24 60.3 61.3 – – 28 28 30 28 – – – 36 68 10 90 95 96 6 3.2
65 220 170 26 8 M24 76.1 77.5 – – 30 30 34 30 – – 45 40 76 12 108 118 118 6 3.6
80 230 180 26 8 M24 88.9 90.5 – – 34 32 36 32 – – 60 44 78 12 120 130 128 8 4
100 265 210 30 8 M27 114.3 116 – – 36 36 40 36 – – 80 52 90 12 150 158 150 8 5
125 315 250 33 8 M30 139.7 141.5 – – 42 40 40 40 – – 105 56 105 12 180 188 185 8 6.3
150 355 290 33 12 M30 168.3 170.5 – – 48 44 44 44 – – 130 60 115 12 210 225 216 10 7.1
200 430 360 36 12 M33 219.1 221.5 – – 60 52 52 52 – – 180 – 130 16 278 – 278 10 10
250 505 430 39 12 M36 273 276.5 – – 72 60 60 60 – – 210 – 157 18 340 – 340 12 12.5
300 585 500 42 16 M39 323.9 327.5 – – 84 68 68 68 – – 260 – 170 18 400 – 407 12 14.2
350 655 560 48 16 M45 355.6 359.5 – – 95 74 74 74 – – 300 – 189 20 460 – 460 12 16
400 715 620 48 16 M45 406.4 411 – – 406 – 78 – – – – – – – – – 518 –
500 870 760 56 20 M52 508 543.5 – – 128 – 94 – – – – – – – – – 630 –

* For flanges type 21 the outside hub diameter approximately corresponds to the outside pipe diameter.

EN 1092-1 PN 160 Flange Dimensions

en 1092 1 pn160 flange dimensions 2 - EN 1092 Flanges

Typ 01: Plate (slip-on) flanges for welding Typ 13: Hubbed threaded flanges
Typ 02: Loose plate flanges with weld-on plate collar Typ 21: Integral flanges
Typ 04: Loose plate flanges with weld-neck collar Typ 32: Weld-on plate collars
Typ 05: Blank (blind) flanges Typ 33: Lapped pipe ends
Typ 11: Weld-neck flanges Typ 34: Weld-neck collars
Typ 12: Hubbed slip-on flanges for welding  
D: Outside Diameter K: Diameter of Bolt Circle L: Diameter of Bolt Hole A: Outside Diameter of Neck E: Chamfer F: Collar thickness G max: Diameter of Shoulders R: Corner Radius N: Neck Diameter S: Neck Thickness (Preferred value)
Typ 01: Plate (slip-on) flanges for welding Typ 13: Hubbed threaded flanges
Typ 02: Loose plate flanges with weld-on plate collar Typ 21: Integral flanges
Typ 04: Loose plate flanges with weld-neck collar Typ 32: Weld-on plate collars
Typ 05: Blank (blind) flanges Typ 33: Lapped pipe ends
Typ 11: Weld-neck flanges Typ 34: Weld-neck collars
Typ 12: Hubbed slip-on flanges for welding  
D: Outside Diameter K: Diameter of Bolt Circle L: Diameter of Bolt Hole A: Outside Diameter of Neck E: Chamfer F: Collar thickness G max: Diameter of Shoulders R: Corner Radius N: Neck Diameter S: Neck Thickness (Preferred value)
DN Mating dimensions A Flange Thickness Length
Neck

 

Diameters

 

R1 S
D K L Bolting
No Size C2 C3 H2 H3 N1 N3
Flange type
11, 21
11

 

21*

 

11 21 11 11 11 21 11 21 11
10 100 70 14 4 M12 17.2 20 20 45 6 32 40 4 4 2.0
15 105 75 14 4 M12 21.3 20 20 45 6 34 45 4 4 2.0
25 140 100 18 4 M16 33.7 24 24 58 8 52 61 4 4 2.9
40 170 125 22 4 M20 48.3 28 28 64 10 70 82 6 4 3.6
50 195 145 26 4 M24 60.3 30 30 75 10 90 96 6 4 4.0
65 220 170 26 8 M24 76.1 34 34 82 12 108 118 6 5 5.0
80 230 180 26 8 M24 88.9 36 36 86 12 120 128 8 5 6.3
100 265 210 30 8 M27 114.3 40 40 100 12 150 150 8 5 8.0
125 315 250 33 8 M30 139.7 44 44 115 14 180 184 8 6 10.0
150 355 290 33 12 M30 168.3 50 50 128 14 210 224 10 6 12.5
200 430 360 36 12 M33 219.1 60 60 140 16 278 288 10 8 16.0
250 515 430 42 12 M39 273.0 68 68 155 18 340 346 12 8 20.0
300 585 500 42 16 M39 323.9 78 78 175 18 400 414 12 10 22.2
  • For flanges type 21 the outside hub diameter approximately corresponds to the outside pipe diameter.

EN 1092-1 PN 250 Flange Dimensions

en 1092 1 pn160 flange dimensions 2 - EN 1092 Flanges

Typ 01: Plate (slip-on) flanges for welding Typ 13: Hubbed threaded flanges
Typ 02: Loose plate flanges with weld-on plate collar Typ 21: Integral flanges
Typ 04: Loose plate flanges with weld-neck collar Typ 32: Weld-on plate collars
Typ 05: Blank (blind) flanges Typ 33: Lapped pipe ends
Typ 11: Weld-neck flanges Typ 34: Weld-neck collars
Typ 12: Hubbed slip-on flanges for welding  
D: Outside Diameter K: Diameter of Bolt Circle L: Diameter of Bolt Hole A: Outside Diameter of Neck E: Chamfer F: Collar thickness G max: Diameter of Shoulders R: Corner Radius N: Neck Diameter S: Neck Thickness (Preferred value)
Typ 01: Plate (slip-on) flanges for welding Typ 13: Hubbed threaded flanges
Typ 02: Loose plate flanges with weld-on plate collar Typ 21: Integral flanges
Typ 04: Loose plate flanges with weld-neck collar Typ 32: Weld-on plate collars
Typ 05: Blank (blind) flanges Typ 33: Lapped pipe ends
Typ 11: Weld-neck flanges Typ 34: Weld-neck collars
Typ 12: Hubbed slip-on flanges for welding  
D: Outside Diameter K: Diameter of Bolt Circle L: Diameter of Bolt Hole A: Outside Diameter of Neck E: Chamfer F: Collar thickness G max: Diameter of Shoulders R: Corner Radius N: Neck Diameter S: Neck Thickness (Preferred value)
DN Mating dimensions A Flange Thickness Length
Neck

 

Diameters

 

R1 S
D K L Bolting
No Size C2 C3 H2 H3 N1 N3
Flange type
11, 21
11

 

21*

 

11 21 11 11 11 21 11 21 11
10 125 85 18 4 M16 – – 24 – – – 46 – 4 –
15 130 90 18 4 M16 21.3 26 26 60 6 48 52 4 4 2.6
25 150 105 22 4 M20 33.7 28 28 65 8 60 63 4 4 3.6
40 185 135 26 4 M24 48.3 34 34 80 10 80 90 6 4 5.0
50 200 150 26 4 M24 60.3 38 38 85 10 84 102 6 5 6.3
65 230 180 26 8 M24 76.1 42 42 95 12 95 125 6 5 8.0
80 255 200 30 8 M27 101.6 46 46 102 12 136 142 8 5 11.0
100 300 235 33 8 M30 127.0 54 54 120 14 164 168 8 6 14.2
125 340 275 33 8 M30 152.4 60 60 140 16 200 207 8 6 16.0
150 390 320 36 12 M33 177.8 68 68 160 18 240 246 10 8 17.5
200 485 400 42 12 M39 244.5 82 82 1900 25 305 314 10 8 25.0
250 585 490 48 16 M45 298.5 100 100 215 30 385 394 12 10 32.0
300 690 590 52 16 M48 – – 120 – – – 480 – 10 –
  • For flanges type 21 the outside hub diameter approximately corresponds to the outside pipe diameter.
  • For flanges type 21
  • For flanges type 11 use flanges PN 320

EN 1092-1 PN 400 Flange Dimensions

en 1092 1 pn400 flange dimensions - EN 1092 Flanges

Typ 01: Plate (slip-on) flanges for welding Typ 13: Hubbed threaded flanges
Typ 02: Loose plate flanges with weld-on plate collar Typ 21: Integral flanges
Typ 04: Loose plate flanges with weld-neck collar Typ 32: Weld-on plate collars
Typ 05: Blank (blind) flanges Typ 33: Lapped pipe ends
Typ 11: Weld-neck flanges Typ 34: Weld-neck collars
Typ 12: Hubbed slip-on flanges for welding  
D: Outside Diameter K: Diameter of Bolt Circle L: Diameter of Bolt Hole A: Outside Diameter of Neck E: Chamfer F: Collar thickness G max: Diameter of Shoulders R: Corner Radius N: Neck Diameter S: Neck Thickness (Preferred value)
DN Mating dimensions A Flange Thickness Length
Neck

 

Diameters

 

R1 S
D K L Bolting
No Size C2 C3 H2 H3 N1 N3
Flange type
11, 21
11

 

21*

 

11 21 11 11 11 21 11 21 11
10 125 85 18 4 M16 17.2 28 28 65 8 48 48 4 4 3.6
15 145 100 22 4 M20 26.9 30 30 68 8 56 57 4 4 5.0
25 180 130 26 4 M24 42.4 38 38 90 10 82 81 4 5 7.1
40 220 165 30 4 M27 60.3 48 48 110 12 106 105 6 5 10.0
50 235 180 30 8 M27 76.1 52 52 120 15 120 120 6 6 12.5
65 290 225 33 8 M30 101.6 64 64 135 18 158 158 6 6 16.0
80 305 240 33 8 M30 114.3 68 68 150 20 174 174 8 8 17.5
100 370 295 39 8 M36 139.7 80 80 175 25 216 216 8 8 22.2
125 415 340 39 12 M36 193.7 92 92 200 30 258 259 8 10 30.0
150 475 390 42 12 M39 219.1 105 105 225 35 302 302 10 10 35.0
200 585 490 48 16 M45 273.0 130 130 280 40 388 388 10 10 40.0
  • For flanges type 21 the outside hub diameter approximately corresponds to the outside pipe diameter.

EN 1092-1 Flanges Weight Chart

Rated Pressure (in bar)
Description (1 bar = 14.5 psi = 100 kPa)
10 16 25 40 63 100
6
01 Plate <slip-on> flanges for V V V V V V V
welding
02 Loose plate flanges with V V V V V
weld-on plate collar
04 Loose plate flanges with V V V V V
weld-neck collar
05 Blank <blind> flanges V V V V V V V
11 Weld-Neck Flanges V V V V V V V
12 Hubbed slip-on flanges for V V V V V V V
13 Hubbed threaded flanges V V V V
21 Integral flnages V V V V V V V
32 Weld-on plate collars V V V V V
33 Lapped pipe ends V V V V V
34 Weld-neck collars V V V V V

Different versions of raised or none raised faces

Form: types of Contact Faces DIN EN 1092-1
Without Raised Face Form A
Raised Face (Rz = 160 Mechanical Turned) Form B1
Raised Face ( Rz = 40 Mechanical Turned) Form B1
Raised Face (Rz = 16 Mechanical Turned) Form B2
Tongue According to DIN2512 Form C
Groove According to DIN 2512 Form D
Male According to DIN 2513 Form E
Female According to DIN 2513 Form F
Female According to DIN 2514 Form G
Male According to DIN 2514 Form H

EN 1092-2 PN10 Flange Dimensions

en 1092 2 pn10 flange dimensions - EN 1092 Flanges

DN D C1 C2 H1 H2 H3 R A N1 N2 B1 d1 f1 S
10 90 14 14 20 35 6 4 17,2 28 30 18 40 2 1,8
15 95 14 14 20 35 6 4 21,3 32 35 22 45 2 2,0
20 105 14 14 24 38 6 4 26,9 39 45 27,5 58 2 2,3
25 115 16 16 24 38 6 4 33,7 46 52 34,5 68 2 2,6
32 140 18 16 26 40 6 6 42,4 56 60 43,5 78 2 2,6
40 150 18 16 26 42 7 6 48,3 64 70 49,5 88 2 2,6
50 165 19 18 28 45 8 6 60,3 75 84 61,5 102 2 2,9
65 185 20 18 32 45 10 6 76,1 90 104 77,5 122 2 2,9
80 200 20 20 34 50 10 8 88,9 105 118 90,5 138 2 3,2
100 220 22 20 40 52 12 8 114,3 131 140 116 158 2 3,6
125 250 22 22 44 55 12 8 139,7 156 168 141,5 188 2 4,0
150 285 24 22 44 55 12 10 168,3 192 195 170,5 212 2 4,5
200 340 26 24 44 62 16 10 219,1 235 246 221,5 268 2 5,6
250 405 29 26 46 70 16 12 273 292 298 276,5 320 2 6,3
300 460 32 28 46 78 16 12 323,9 344 350 327,5 378 2 7,1
350 520 35 30 57 82 16 12 355,6 390 400 359 438 2 8,0
400 580 38 32 63 85 16 12 406,4 445 456 411,0 490 2 8,0
450 640 42 40 68 87 16 12 457,0 490 502 462,0 550 2 8,0
500 715 46 44 73 90 16 12 508,0 548 559 513,5 610 2 8,0
600 840 52 54 83 95 18 12 610,0 652 658 616,5 725 2 8,8
700 910 – 36 83 100 18 12 711,0 755 760 – 795 2 8,8
800 1025 – 38 90 105 20 12 813,0 855 864 – 900 2 10,0
900 1125 – 40 94 110 20 12 914,0 955 968 – 1000 2 10,0
1000 1255 – 42 100 120 22 16 1016,0 1058 1072 – 1115 2 10,0
1200 1485 – 48 – 130 30 16 1219,0 1262 – – 1330 2 12,5
1400 1685 – 52 – 145 30 16 1420,0 1465 – – 1530 2 14,2
1600 1930 – 58 – 160 35 16 1620,0 1668 – – 1750 2 16,0
DN D C1 C2 H1 H2 H3 R A N1